
Kenwood KAC-9104D Review
1 of 1 people found this review helpful.
TEST RESULTS
Output power @ 1% THD, 100Hz, 14.4 volts
Mono @ 4 ohm 506 watts
Mono @ 2 ohm 644 watts
Mono @ 1 ohm N/A
Output power @ 1% THD, 100Hz, 12.5 volts
Mono @ 4 ohm 444 watts
Mono @ 2 ohm 565 watts
Mono @ 1 ohm N/A
Distortion at rated power, 100Hz, 14.4 volts 0.9% @ 2 ohms
Input sensitivity 467mV to 5.7 volts
Frequency response (+1dB) 11Hz - 178kHz
S/N Ratio (A weighted, below clipping, min. gain) >76dB
Idle current 1.5 amps
Maximum current consumption, unclipped 68 amps @ 578 watts
Efficiency at one-third power lowest impedance 75%
Efficiency at full power, 1% THD, 2 ohm 66%
Efficiency at full power, 1% THD, 4 ohm 81%
Crossover slope, lowpass 18dB/octave
Crossover range, lowpass 50-200Hz
Crossover slope, highpass 12dB/octave
Crossover range, highpass 12Hz and 23Hz
Bass boost +17dB @ 40Hz
Dimensions 13 3/4"L x 9 3/8"W x 2 5/16" H
I was very pleased by the performance in the car. Even though I could only squeeze 644 watts out of the unit, at $300, that's only 47 cents per watt, quite a value. It's big enough to be fun, with a price you can afford. I'd recommend this amp for anyone whos doing a system for the first time.
Review ID: 10000000012222688

Thank you for voting. If your vote meets our
guidelines, it will be posted within 24 hours.
You cannot vote on the helpfulness of a review you wrote.
Your request cannot be processed at this time. Please try again later.