
ALPS PRINTERS 1000 MD 1300 MD 5000 MD
Review created: 06/18/06(updated 06/21/06)
21 of 21 people found this review helpful.
The alps 1000 md ,is the best printer for making decals .The only advantage a 1300 has over the 1000 is you can use the blue alps cartridges which are mainly used for photo's the 1300 md comes with a built in dye sub. key function. It's just Like the Alps 5000 printer-which you will need to buy a Dye Key for, to put it in the dye sub. mode .the 5000 md has only one advantage its takes 7 cartridges as compared to 4 for the 1000md or 1300md . all three print in 'WHITE'' . however the ''BEST BANG FOR YOU BUCK ''is the 1000.
Since, I wrote this review I have been contacted by a lot of ebay members who has been taken by sellers ,who have stated printer work's , or that don't have them hooked up to a computer ,only to fine when they receive printer its ''DOA '' (dead on arrival ) . Well here is a test to check printer
Follow the steps below to perform the print head check.
This test applies to the Micro Dry series MD-1000/1300/5000(P)only.
Turn the printer off.
Load a sheet of white laser paper.
Press and hold the "Power" & "Ready/FF" buttons at the same time.
Release the "Power" button, and keep pressing the Ready/FF" button.
Right after you release the "Power" button, count 4 seconds, and release the Ready/FF" button.
Immediately, press and release the "Ready/FF" button one last time.
The printer should start printing a series of letters, numbers, horizontal lines and a black solid bar at the bottom of the sheet.
Once this test page is completed, turn the printer off to stop the test.
(ZR-1-1991)
Review ID: 10000000001212796

Thank you for voting. If your vote meets our
guidelines, it will be posted within 24 hours.
You cannot vote on the helpfulness of a review you wrote.
Your request cannot be processed at this time. Please try again later.